Jiangsu state spring Pump Manufacturing Co., Ltd.

addAdd: No. four, No. 18, Zhenjiang hi tech Industrial Development Zone
faxFax: 0511-88890889
Business advice: 0511-88889623
Technical support: 0511-88880503
Switchboard: 0511-88890999


COPYRIGHT © 2017 Jiangsu state spring Pump Manufacturing Co., Ltd.  苏ICP备14023978号     Powered by


Sludge return pump


Sludge return pump

Affiliate classification

Product use:

Return sludge pump is our company in the diving mixer on the basis of special equipment for the two sewage treatment plant mixed liquid recycle and denitrification deoxidation, with superior performance, convenient operation, high reliability, large flow, high efficiency characteristics of back. It can also be used for surface drainage, irrigation and wastewater recycling, requiring micro lift and large flow occasions.

Use condition:

1, continuous running time, medium temperature is not higher than 40 degrees

2, pH value 4~10

3, the maximum submergence depth 10m

Product features:

1, according to the micro head, large flow special design, high efficiency.

2, hydraulic parts of the propeller with swept blade design, anti clogging, winding resistance, reliable use.

3, compact structure, smooth appearance, high degree of standardization, convenient installation and maintenance.

4, using a special cable outlet structure, eliminates burned due to man-made pulling, crushing, cable cable jacket aging and other accidental factors Water Leakage, leakage, short circuit and stator coil, effectively reduces the probability of the failure of the upper part of the water.

5, taking into account the sludge recycling pump may occur in the start-up and operation of the situation, built a number of early warning sensors, including wiring room, motor cavity and oil chamber leakage, the upper and lower bearings and motor coil temperature rise. In the external control cabinet, such as lack of phase, short circuit, over-current and water level control protection.

6, return sludge pump uses three bearings, self-lubricating bearings with sealing cover with upper end, a centripetal thrust bearing with the lower end of a rolling bearing, the structure to ensure all bearings running in effective lubrication conditions, improve the bearing and mechanical seal life, reduce the vibration and noise of the pump.

7, the product has applied double sealed patent structure.

Model specification

Corresponding parameter set not found, please add it in property template of background
Key words